Mobile Site Full Version
share:

Reference Standards: Search Standards

Looking for a Specific Compound?
Enter a compound name, synonym, or CAS # below.

Pharmaceutical Impurities Standard (2 components)

More Details
  • Features two common alkyl halideschloromethane and chloroethanethat can form during drug synthesis.
  • High-concentration (5,000 μg/mL) solution maximizes flexibility; ideal for analyzing pharmaceutical genotoxic impurities (GTIs).
  • Quantitatively tested to confirm composition and stability; detailed support documentation provided.

GC Multiresidue Pesticide Kit

More Details
  • Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.
  • Comprehensive 203-compound kit covers food safety lists by the FDA, USDA, and other global governmental agencies; individual ampuls also sold separately.

LC Multiresidue Pesticide Kit

More Details
  • Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.
  • Full kit contains 204 compounds of interest, covering many LC-determined pesticides listed by government agencies; individual ampuls also sold separately.

8260 MegaMix Calibration Mix, Revised (75 components)

More Details
  • Contains 75 compounds in one convenient ampul for the analysis of VOCs in solid waste.
  • Quantitatively analyzed to confirm concentration and identity of each compound.
  • Excludes pentachloroethane for labs experiencing elevated tetrachloroethene response caused by pentachloroethane breakdown.

8270 MegaMix Standard (76 components)

More Details
  • Fewest mixtures needed for calibration and matrix spikes.
  • Mixtures formulated for maximum stability.
  • Contains most routinely analyzed compounds.

8260 MegaMix Calibration Mix (76 components)

More Details
  • Contains 76 compounds in one convenient ampul for the analysis of VOCs in solid waste.
  • Quantitatively analyzed to confirm concentration and identity of each compound.

502.2 MegaMix Standard (54 components)

More Details
Includes all target analytes except the six gases, which are available separately as 502.2 Calibration Mix #1.

MOSH/MOAH Retention Time Standard (10 components)

More Details
  • Developed specifically for using LC coupled with GC-FID to accurately determine hydrocarbons found in mineral oils, which can migrate from processing equipment and packaging into food.
  • This 10-component mix contains both mineral oil saturated hydrocarbon (MOSH) and mineral oil aromatic hydrocarbon (MOAH) markers that are used to accurately identify GC retention time limits for integration.

Residual Solvents Class 3 - Mix B (2 components)

More Details
  • Multicomponent mixes simplify standard prep and reduce variability.
  • Ideal for USP <467> residual solvents analysis.
  • Verified composition and stability.

Residual Solvents Class 3 - Mix A (24 Components)

More Details
  • Multicomponent mixes simplify standard prep and reduce variability.
  • Ideal for USP <467> residual solvents analysis.
  • Verified composition and stability.

Pyrethrins Standard

More Details
Isomeric in nature, the pyrethrins neat material contains the following isomers: cinerin I and II, jasmolin I and II, and pyrethrin I and II. Isomer ratios for each lot are given in elution order on the certificate.

EPA Method 525.3 Surrogate Standard (3 components)

More Details
  • Developed specifically for EPA Method 525.3.
  • Formulated to provide maximum stability in concentrations convenient for dilution.
  • Simplifies and speeds up standard preparation.
  • Quantitatively tested to confirm composition; detailed support documentation provided.

EPA Method 525.3 PCP IS

More Details
  • Developed specifically for EPA Method 525.3.
  • Formulated to provide maximum stability in concentrations convenient for dilution.
  • Simplifies and speeds up standard preparation.
  • Quantitatively tested to confirm composition; detailed support documentation provided.

EPA Method 525.3 PAH IS Mix (3 components)

More Details
  • Developed specifically for EPA Method 525.3.
  • Formulated to provide maximum stability in concentrations convenient for dilution.
  • Simplifies and speeds up standard preparation.
  • Quantitatively tested to confirm composition; detailed support documentation provided.

EPA Method 525.3 PCB Cal Standard (14 components)

More Details
  • Developed specifically for EPA Method 525.3.
  • Formulated to provide maximum stability in concentrations convenient for dilution.
  • Simplifies and speeds up standard preparation.
  • Quantitatively tested to confirm composition; detailed support documentation provided.

EPA Method 525.3 PAH Cal Standard (20 components)

More Details
  • Developed specifically for EPA Method 525.3.
  • Formulated to provide maximum stability in concentrations convenient for dilution.
  • Simplifies and speeds up standard preparation.
  • Quantitatively tested to confirm composition; detailed support documentation provided.

EPA Method 525.3 ONP Cal Standard (44 components)

More Details
  • Developed specifically for EPA Method 525.3.
  • Formulated to provide maximum stability in concentrations convenient for dilution.
  • Simplifies and speeds up standard preparation.
  • Quantitatively tested to confirm composition; detailed support documentation provided.

EPA Method 525.3 OPP Cal Standard (16 components)

More Details
  • Developed specifically for EPA Method 525.3.
  • Formulated to provide maximum stability in concentrations convenient for dilution.
  • Simplifies and speeds up standard preparation.
  • Quantitatively tested to confirm composition; detailed support documentation provided.

EPA Method 525.3 OCP Cal Standard (29 components)

More Details
  • Developed specifically for EPA Method 525.3.
  • Formulated to provide maximum stability in concentrations convenient for dilution.
  • Simplifies and speeds up standard preparation.
  • Quantitatively tested to confirm composition; detailed support documentation provided.

PAH Interferences Standard (5 components)

More Details
  • The only standard formulated to contain all major PAH interferences for priority PAHs.
  • Pair with an Rxi-PAH column and Restek’s EU 15+1 PAH standard to optimize method conditions and ensure separation of interferences and target PAHs.
  • Confirm the presence of common interferences by retention time comparisons.
  • PAH components are present in different concentrations so isomers can be distinguished by the difference in response factors.
  • Low-volatility toluene solvent provides longer shelf life, which helps ensure more accurate results.
  • Broad solvent miscibility—compatible with acetonitrile, the QuEChERS solvent.
  • HPLC compatible when diluted in appropriate solvent and analyzed with Pinnacle II PAH columns or UHPLC compatible on the Pinnacle DB PAH column.

EU 15+1 PAH Standard (16 components)

More Details
  • Formulated to contain the 16 major European Food Safety Authority (EFSA) PAH compounds.
  • High concentration (100 μg/mL) solution provides value and flexibility. Dilute as needed for fortification and calibration mixes.
  • Low-volatility toluene solvent provides longer shelf life, which helps ensure more accurate results.
  • Broad solvent miscibility—compatible with acetonitrile, the QuEChERS solvent.

EU 15+1 PAH Standard (16 components)

More Details
  • Formulated to contain the 16 major European Food Safety Authority (EFSA) PAH compounds.
  • High concentration (100 μg/mL) solution provides value and flexibility. Dilute as needed for fortification and calibration mixes.
  • Low-volatility toluene solvent provides longer shelf life, which helps ensure more accurate results.
  • Broad solvent miscibility—compatible with acetonitrile, the QuEChERS solvent.

GC Multiresidue Pesticide Standard #9 (8 components)

Organophosphorus Compounds

More Details
Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

GC Multiresidue Pesticide Standard #8 (24 components)

Organophosphorus Compounds

More Details
Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

GC Multiresidue Pesticide Standard #7 (10 components)

Herbicide Methyl Esters

More Details
Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

GC Multiresidue Pesticide Standard #6 (18 components)

Synthetic Pyrethroid Compounds

More Details
Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

GC Multiresidue Pesticide Standard #5 (34 components)

Organonitrogen Compounds

More Details
Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

GC Multiresidue Pesticide Standard #4 (28 components)

Organonitrogen Compounds

More Details
Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

GC Multiresidue Pesticide Standard #3 (25 components)

Organonitrogen Compounds

More Details
Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

GC Multiresidue Pesticide Standard #2 (40 components)

Organochlorine Compounds

More Details
Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

GC Multiresidue Pesticide Standard #1 (16 components)

Organophosphorus Compounds

More Details
Accurately identify and quantify pesticide residues by GC-MS/MS in fruits, vegetables, botanicals, and herbals such as tea, ginseng, ginger, echinacea, and dietary supplements.

QuEChERS Performance Standard C (17 components)

More Details
  • Designed for use in all QuEChERS methods for pesticides in fruits and vegetables, including the original unbuffered method, AOAC 2007.01, and EN15662.
  • Ideal for initial method evaluations and ongoing method performance validations.
  • Optimized blend of chemically compatible analytes for maximum stability and shelf life.
  • Precise formulation improves data quality and operational efficiency; spend more time running samples and less time sourcing and preparing standards.
  • Quantitatively analyzed to confirm the composition and stability of each mixture.

QuEChERS Performance Standard B (7 components)

More Details
  • Designed for use in all QuEChERS methods for pesticides in fruits and vegetables, including the original unbuffered method, AOAC 2007.01, and EN15662.
  • Ideal for initial method evaluations and ongoing method performance validations.
  • Optimized blend of chemically compatible analytes for maximum stability and shelf life.
  • Precise formulation improves data quality and operational efficiency; spend more time running samples and less time sourcing and preparing standards.
  • Quantitatively analyzed to confirm the composition and stability of each mixture.

QuEChERS Performance Standard A (16 components)

More Details
  • Designed for use in all QuEChERS methods for pesticides in fruits and vegetables, including the original unbuffered method, AOAC 2007.01, and EN15662.
  • Ideal for initial method evaluations and ongoing method performance validations.
  • Optimized blend of chemically compatible analytes for maximum stability and shelf life.
  • Precise formulation improves data quality and operational efficiency; spend more time running samples and less time sourcing and preparing standards.
  • Quantitatively analyzed to confirm the composition and stability of each mixture.

QuEChERS Performance Standards Kit

More Details
  • Designed for use in all QuEChERS methods for pesticides in fruits and vegetables, including the original unbuffered method, AOAC 2007.01, and EN 15662.
  • Kit contains organochlorine, organonitrogen, organophosphorus, and carbamate pesticides commonly used on fruits and vegetables.
  • Volatile, polar, active, base-sensitive, and nonvolatile compounds are included to allow comprehensive evaluation of QuEChERS extraction and cleanup efficiencies, and optimization of GC and LC instrumental conditions.
  • Ideal for initial method evaluations and ongoing method performance validations.
  • Analytes are divided into three ampuls based on compatibility for maximum stability and shelf life.*
  • Precise formulations improve data quality and operational efficiency; spend more time running samples and less time sourcing and preparing standards.
  • Quantitatively analyzed to confirm the composition and stability of each mixture.

    *When combining compounds with different functionalities, chemical stability can be an issue. The analytes in this kit are separated into three mixes to ensure maximum long-term storage stability. For analysis, a fresh working standard should be prepared by combining the three kit mixes in a 1:1:1 ratio to prepare a 100 µg/mL working standard solution. Once blended, Restek does not recommend storing working standards or subsequent dilutions for future use.

    Contains 1 mL each of these mixtures.
    31153: QuEChERS Performance Standard A
    31154: QuEChERS Performance Standard B
    31155: QuEChERS Performance Standard C

LC Multiresidue Pesticide Standard #10 (Carbendazim)

Carbamate/Uron Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

LC Multiresidue Pesticide Standard #9 (7 components)

Carbamate/Uron Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

LC Multiresidue Pesticide Standard #8 (Hydramethylnon)

Organonitrogen Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

LC Multiresidue Pesticide Standard #7 (7 components)

Organonitrogen Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

LC Multiresidue Pesticide Standard #6 (28 components)

Organonitrogen Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

LC Multiresidue Pesticide Standard #5 (30 components)

Organonitrogen Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

LC Multiresidue Pesticide Standard #4 (63 components)

Organonitrogen Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

LC Multiresidue Pesticide Standard #3 (38 components)

Carbamate/Uron Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

LC Multiresidue Pesticide Standard #2 (16 components)

Carbamate/Uron Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

LC Multiresidue Pesticide Standard #1 (13 components)

Organophosphorus Compounds

More Details
Accurately detect and quantify pesticides of global food safety concern in a wide range of fruits, vegetables, and other commodities by LC-MS/MS.

MOSH/MOAH Standard (9 components)

More Details
  • Developed specifically for using LC coupled with GC-FID to accurately determine hydrocarbons found in mineral oils, which can migrate from processing equipment and packaging into food.
  • This 9-component mix contains noninterfering internal standards as well as both mineral oil saturated hydrocarbon (MOSH) and mineral oil aromatic hydrocarbon (MOAH) markers that are used to correctly cut LC fractions.

Labeled Pesticide Residue Internal Standards for Food Analysis

More Details
  • Isotopically labeled to provide the best approach for pesticide residue quantification.
  • Multiple options let you choose internal and surrogate standards that will mitigate matrix effects.
  • Economically priced and compatible with both LC-MS and GC-MS applications; even helpful for optimizing LC-MS/MS system performance.
  • Restek is your complete supplier for world-class food safety analysis: pesticide reference standard mixes and internal/surrogate standards, GC and LC columns, QuEChERS, and more!

Fragrance Allergen Standards Kit

More Details
  • Fully resolves 31 fragrance allergens with one analysis on an Rxi-17 column.
  • Ideal for GC-MS analysis following IFRA methodology.
  • Helps you meet EU requirements defined in the European Cosmetics Directive.
  • All components included at 400 ppm to allow dilution for calibration curves and use with different solvents.
  • Exceeds purity requirements outlined in IFRA method.
  • This kit contains one ampul of each of the following cat.#s: 33100, 33101, 33102, 33103, 33104. (Components of the kit are not available for individual sale.)

    See Compounds tab for a detailed list of compounds contained in this formulation.

trans Fat Reference Standard (13 components)

More Details
  • For accurate determination of trans fat content in foods and edible oils.
  • Pair with an Rt-2560 GC column for reliable AOAC and AOCS method performance.
  • Verified composition and stability.

Triundecanoin

More Details
  • For accurate determination of trans fat content in foods and edible oils.
  • Pair with an Rt-2560 GC column for reliable AOAC and AOCS method performance.
  • Verified composition and stability.

Tritridecanoin Glyceride

More Details
  • For accurate determination of trans fat content in foods and edible oils.
  • Pair with an Rt-2560 GC column for reliable AOAC and AOCS method performance.
  • Verified composition and stability.

Boron Trifluoride

More Details
  • For accurate determination of trans fat content in foods and edible oils.
  • Pair with an Rt-2560 GC column for reliable AOAC and AOCS method performance.
  • Verified composition and stability.

    Boron trifluoride is very sensitive to moisture and should not be stored after opening. This is a single-use container.

EtG and EtS Standards

More Details
  • Alcohol metabolite biomarkers for monitoring alcohol consumption in urine samples.
  • Available as unlabeled standards for instrument calibration and as deuterated internal standards for sample analysis.
  • Verified composition and stability.

Qualitative Retention Time Index Standard (27 components)

More Details
  • Appropriate for a wide range of retention index systems.
  • Certified reference material (CRM) verified to be stable and accurate.
  • Qualitatively analyzed to confirm composition; certificate available for each CRM lot.

Residual Solvents Class 2 - Mix A (2013 Rev) (16 components)

More Details
  • Detect and quantify USP <467> Class 2 residual solvents in pharmaceuticals.
  • Reformulated to include cumene, added to USP <467> Class 2 list in August 2013.
  • Quantitatively tested to confirm composition and stability; detailed support documentation provided.
  • Restek is your complete supplier for world-class USP <467> residual solvent analysis: reference standards, Rxi-624Sil MS (G43) and Stabilwax (G16) GC columns, inlet liners, accessories, applications, and more.

74 Comp TO15 + NJ Mix, (no Acrolein) (74 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)—meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

10 Comp NJ Subset Test Mix (10 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

75 Comp TO15 + NJ Mix (75 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

EFSA PAH4 Standard (4 components)

More Details
  • European Food Safety Authority (EFSA) PAH4 compounds prepared in toluene solvent.
  • High 1,000 µg/mL concentrationdilute as needed to economically prepare custom mixes.
  • Low volatilitylonger shelf life and more accurate results.
  • High miscibilitycompatible with QuEChERS solvents.

EFSA PAH4 Standard (4 components)

More Details
  • European Food Safety Authority (EFSA) PAH4 compounds prepared in toluene solvent.
  • High 1,000 µg/mL concentrationdilute as needed to economically prepare custom mixes.
  • Low volatilitylonger shelf life and more accurate results.
  • High miscibilitycompatible with QuEChERS solvents.

UCMR3 Method 539 Calibration Standard (7 components)

More Details
  • Contains the seven hormones listed in EPA Method 539 at concentrations suited for Unregulated Contaminant Monitoring Rule 3 (UCMR3) screening.
  • Ideal for the analysis of finished drinking water as outlined in UCMR3, which requires monitoring of all public drinking water systems with 10,000 or more customers.

EPA 524.3 Reference Standards (5 separate mixes, including a MegaMix standard)

More Details
  • Full 82-component EPA 524.3 list using as few as three ampulsreduce prep time and chances for error or contamination.
  • EPA 524.3 VOA MegaMix ampul includes oxygenates groupno need to order separately.
  • Volatile gases prepared separatelyreplace shorter-life components without wasting money on full list.
  • Two options for internal and surrogate standardsseparate or combined mix.
  • Also ideal for surface water and groundwater testing.

Appendix IX Mix #1, Revised (17 components)

More Details
Please note: methapyrilene is not included in this revised standard.

BAC Resolution Control Standard n-P (6 components)

More Details
  • Use to verify the retention time for each compound normally included in a blood alcohol test, and to verify that the compounds are resolved from and do not interfere with one another.
  • Includes 1-propanol internal standard.
  • Intended for qualitative use only.

BAC Resolution Control Standard t-B (6 components)

More Details
  • Use to verify the retention time for each compound normally included in a blood alcohol test, and to verify that the compounds are resolved from and do not interfere with one another.
  • Includes tert-butanol internal standard.
  • Intended for qualitative use only.

EPA 539 Calibration Stock Standard (7 components)

More Details
  • Contains the seven hormones listed in EPA Method 539 at the appropriate concentrations.

AOAC QuEChERS QC Spike Mix (27 components)

More Details
  • Ready to use for generating test mixes, calibration standards, and spiking experiments.
  • Reliable standards produced according to specifications defined in AOAC Official Method 2007.01.
  • Cost-effective QuEChERS standards can be used without dilutions for greater lab efficiency.

AOAC QuEChERS Triphenylphosphate Solution

More Details
  • Ready to use for generating test mixes, calibration standards, and spiking experiments.
  • Reliable standards produced according to specifications defined in AOAC Official Method 2007.01.
  • Cost-effective QuEChERS standards can be used without dilutions for greater lab efficiency.

AOAC QuEChERS IS Solution (2 components)

More Details
  • Ready to use for generating test mixes, calibration standards, and spiking experiments.
  • Reliable standards produced according to specifications defined in AOAC Official Method 2007.01.
  • Cost-effective QuEChERS standards can be used without dilutions for greater lab efficiency.

CLP 04.1 B/N MegaMix Kit

More Details
Contains 1 mL each of these mixtures.
31903: CLP 04.1 B/N MegaMix Standard, Revision 2
31902: CLP/SVOA Additions Mix

SOM01.1 SVOA MegaMix Kit

More Details
Contains 1 mL each of these mixtures.
31900: SOM01.1 SVOA MegaMix Standard, Revised
31902: CLP/SVOA Additions Mix

QuEChERS Single-Component Reference Standards

More Details
Ready to use for QuEChERS extractionsno dilutions necessary.

QuEChERS Quality Control Standards for GC-MS Analysis

More Details
Ready to use for QuEChERS extractionsno dilutions necessary.

QuEChERS Internal Standard Mix for LC-MS/MS Analysis (Nicarbazin)

More Details
Ready to use for QuEChERS extractionsno dilutions necessary.

QuEChERS Internal Standard Mix for GC-MS Analysis (6 components)

More Details
Ready to use for QuEChERS extractionsno dilutions necessary.

QuEChERS Internal Standard Mix for GC-NPD and LC-MS/MS Analysis (2 components)

More Details
Ready to use for QuEChERS extractionsno dilutions necessary.

Acrolein

More Details
This product has a limited shelf life. We recommend that you order only the ampul quantity that meets your immediate needs.

NOTE: Store standards under frozen conditions (0 °C or colder). We recommend you store ampuls lying flat (horizontally) to prevent breakage. For best results, thaw the contents of the ampul fully and shake the ampul well before opening and using the solution.

Silylation Derivatization Reagents

More Details
  • Replace active hydrogen, reducing polarity and making the compounds more volatile.
  • Increase stability of derivatives.

Alkylation Derivatization Reagents

More Details
  • Add alkyl groups to functional hydrogens (H).
  • Decrease polarity on compounds containing acidic hydrogens, i.e., phenols, carboxylic acids.
  • Form an ester.

Alkylation Derivatization Reagents

More Details
  • Add alkyl groups to functional hydrogens (H).
  • Decrease polarity on compounds containing acidic hydrogens, i.e., phenols, carboxylic acids.
  • Form an ester.

Acylation Derivatization Reagents

More Details
  • Most commonly used for electron capture detection.
  • React with alcohols, amines, and phenols.
  • Frequently used for drugs of abuse confirmation.

Sulfur 5-Component Mix (5 components)

More Details
Stability is 12 months from date of manufacture. +/ 10% accuracy.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

8330 Internal Standard (1,4-Dinitrobenzene)

More Details
To ensure the highest quality explosives standards, Restek chemists carefully purify or synthesize all of the compounds listed in EPA Method 8330.

USP <467> Singles

More Details
**Actual concentration of n-hexane reported (determined via a calibration curve) may be below General Chapter <467> limits and could produce a false positive result.

Residual Solvents Class 2 - Mix B (8 components)

More Details
**Actual concentration of n-hexane reported (determined via a calibration curve) may be below General Chapter <467> limits and could produce a false positive result.

Residual Solvents Class 2 - Mix B (8 components)

More Details
**Actual concentration of n-hexane reported (determined via a calibration curve) may be below General Chapter <467> limits and could produce a false positive result.

CLP VOA CAL2000 MegaMix Kit

More Details
Contains 1 mL each of these mixtures.
30632: CLP VOA CAL2000 MegaMix Standard
30216: vinyl acetate

8260 MegaMix Calibration Mix Kit

More Details
Contains 1 mL each of these mixtures.
30633: 8260 MegaMix Calibration Mix
30265: 2-chlorethyl vinyl ether

Isocyanates Singles

More Details
ASTM D5836 and OSHA 42 are test methods for determining 2,4-toluene diisocyanate (2,4-TDI) and 2,6-TDI in the workplace atmosphere. OSHA 47 is for 4,4'-methylenediphenyl isocyanate (4,4'-MDI) in indoor air, and NIOSH Method 5522 is for 2,4-TDI; 2,6-TDI; 4,4'-MDI; and 1,6-hexamethylene diisocyanate (1,6-HDI) in air. Restek offers the 1,-(2-pyridyl)piperzine (1-2pp) derivative.

Isocyanates Singles

More Details
ASTM D5836 and OSHA 42 are test methods for determining 2,4-toluene diisocyanate (2,4-TDI) and 2,6-TDI in the workplace atmosphere. OSHA 47 is for 4,4'-methylenediphenyl isocyanate (4,4'-MDI) in indoor air, and NIOSH Method 5522 is for 2,4-TDI; 2,6-TDI; 4,4'-MDI; and 1,6-hexamethylene diisocyanate (1,6-HDI) in air. Restek offers the 1,-(2-pyridyl)piperzine (1-2pp) derivative.

Residual Solvents Class 2 - Mix B (8 components)

More Details
**Actual concentration of n-hexane reported (determined via a calibration curve) may be below General Chapter <467> limits and could produce a false positive result.

Exempted Drug of Abuse Reference Standards

More Details
Note: Stressed shipping studies indicate that this product remains stable after being continuously exposed to an elevated temperature of 40 °C for 7 days. Ground freight is the default shipping method for this product; expedited methods are available upon request.

Toxaphene Solutions

More Details
  • Toxaphene standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Diesel:Biodiesel (80:20) Blend Standard

More Details
The biodiesel component is methyl soyate.

tert-Butanol-d9 Standard

More Details
An internal standard for oxygenates.

BTEX and MTBE Gas Mix (7 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

tert-Amyl ethyl ether Standard (TAEE)

More Details
Oxygenate additive in (US) gasolines.
A US EPA target analyte that is not commercially available, this reference material is prepared from a laboratory-synthesized sample.

Standard Mixture of n-alkanes for System Performance Test (16 components)

More Details
  • For GC analysis of TPHs in water.
  • Environmentally safer than previous methods.
  • Calibration standard available as Diesel #2/Motor Oil and Diesel #2/Mineral Oil.

Standard Mixture Stock Solution (2 components)

More Details
  • For GC analysis of total petroleum hydrocarbons (TPH) in water.
  • Calibration standard available as diesel #2/motor oil and diesel #2/mineral oil.

Carbohydrate LC Performance Check Mix (5 components)

More Details
  • For simple sugar analysis by LC with refractive index/light scattering detection.
  • Use with a silica column with amino functionality, as recommended by AOAC International.
  • Use as a calibration standard for AACC Method 80-04.
  • Offered dry for enhanced stability.

Fragrance Materials Test Mix (12 components)

More Details
  • Performance evaluation for essential oils and fragrance chemicals.
  • System suitability mixture for GC systems and analytical columns.
  • Convenient 0.5 mL quantity for easy dilution to recommended working solution.

FAPAS Series 9 OP Pesticide Mix 1 (10 components)

More Details
Equal concentration of all compounds. Suitable for GC-FPD, GC-NPD, and GC-MS analysis.

FAPAS Series 5 OC Pesticide Mix 2 (19 components)

More Details
Varied concentrations. Suitable for GC-ECD analysis.

Neat Fatty Acid Methyl Esters

More Details
Use these materials to prepare specific mixtures not commercially available. These products are of the highest purity available, typically 99% by GC-FID analysis. Each compound is packaged under a nitrogen blanket to ensure product stability. A certificate of analysis is provided with each ampul.

Minnesota Ag List 1 Pesticide Kit

More Details
Contains 1 mL each of these mixtures.
32406: Minnesota Ag List Pesticides Mix A
32407: Minnesota Ag List Pesticides Mix B

Minnesota Ag List 1 Pesticide Kit

More Details
Contains 1 mL each of these mixtures.
32406: Minnesota Ag List Pesticides Mix A
32407: Minnesota Ag List Pesticides Mix B

ASTM D6042-96 Calibration Mix (7 components)

More Details
This mixture contains the common antioxidants and slips listed in ASTM D6042-96, along with BHT.

ASTM D6042-96 Calibration Mix (7 components)

More Details
This mixture contains the common antioxidants and slips listed in ASTM D6042-96, along with BHT.

Quality Control Standard Mixture (2 components)

More Details
  • For GC analysis of total petroleum hydrocarbons (TPH) in water.
  • Environmentally safer than previous methods.
  • Calibration standard available as diesel #2/motor oil and diesel #2/mineral oil.

Quality Control Standard Mixture, Revised (2 components)

More Details
  • Updated reference materials for GC analysis of TPH in water.
  • Determination of hydrocarbon oil index—applicable to drinking, surface, waste, and treated water.

C50 in Toluene (n-Pentacontane)

More Details
  • Meets CCME 2001 Petroleum Hydrocarbons in Soil MethodTier 1.
  • Primary reference calibration standards for quantification of four fractions.

CCME PHC Calibration Mix (3 components)

More Details
  • Meets CCME 2001 Petroleum Hydrocarbons in Soil MethodTier 1.
  • Primary reference calibration standards for quantification of four fractions.

Tetrapentyltin Internal Standard

More Details
Complete data pack available for audit compliance.

Tetra-n-propyltin Internal Standard

More Details
Complete data pack available for audit compliance.

Tripentyltin Chloride Surrogate

More Details
Complete data pack available for audit compliance.

Tri-n-propyltin Chloride Surrogate

More Details
Complete data pack available for audit compliance.

Tributyltin Chloride Calibration Mixture

More Details
Complete data pack available for audit compliance.

Butyltin Chloride Calibration Mixture (4 components)

More Details
Complete data pack available for audit compliance.

Blood Alcohol Mix Resolution Control Standard (8 components)

More Details
Use to verify the retention time for each compound normally included in a blood alcohol test and to verify that the compounds are resolved from and do not interfere with one another.

E1618 Test Mix (13 components)

More Details
Components in this mix (0.5 µL/mL or 0.05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.

E1618 Test Mix (13 components)

More Details
Components in this mix (0.5 µL/mL or 0.05% volume/volume each) are at 10X the concentration of the final test solution specified in ASTM 1618 and ASTM 1387.

Weathered Diesel Fuel #2 Kit

More Details
Contains 1 mL each of these mixtures.
31233: Diesel Fuel #2 Standard
31234: Diesel Fuel #2 Standard: 25% Weathered
31235: Diesel Fuel #2 Standard: 50% Weathered
31236: Diesel Fuel #2 Standard: 75% Weathered

Weathered Kerosene Kit

More Details
Contains 1 mL each of these mixtures.
31229: Kerosene Standard
31230: Kerosene Standard: 25% Weathered
31231: Kerosene Standard: 50% Weathered
31232: Kerosene Standard: 75% Weathered

Weathered Gasoline Kit #2

More Details
Contains 1 mL each of these mixtures.
30096: Unleaded Gasoline Standard
30097: Unleaded Gasoline Standard: 25% Weathered
30098: Unleaded Gasoline Standard: 50% Weathered
30099: Unleaded Gasoline Standard: 75% Weathered
30436: Unleaded Gasoline Standard: 99% Weathered

Mineral Spirits

More Details
There are four general types of mineral spirits, classified according to boiling point range (BPR):
  • Type I (Stoddard solvent), BPR 149–182 °C
  • Type II (high flash point), BPR 177–196 °C
  • Type III (odorless), BPR 149–196 °C
  • Type IV (low dry point), BPR 149–174 °C

    This standard is manufactured using the Type 1 mineral spirit.

    Note: Cat.#s 31260 and 31261 are produced with CAS# 64475-85-0, a Type 1 Mineral Spirit containing the proper ratio of n-alkanes (higher proportion) and isoparaffins/cycloalkanes (lower proportion). Lots produced prior to March 2017 contained CAS# 8030-30-6, a C10-C13 isoparaffins odorless Mineral Spirit with >98% isoparaffins (branched alkanes/aromatics) and minimal n-alkanes.

Mineral Spirits

More Details
There are four general types of mineral spirits, classified according to boiling point range (BPR):
  • Type I (Stoddard solvent), BPR 149–182 °C
  • Type II (high flash point), BPR 177–196 °C
  • Type III (odorless), BPR 149–196 °C
  • Type IV (low dry point), BPR 149–174 °C

    This standard is manufactured using the Type 1 mineral spirit.

    Note: Cat.#s 31260 and 31261 are produced with CAS# 64475-85-0, a Type 1 Mineral Spirit containing the proper ratio of n-alkanes (higher proportion) and isoparaffins/cycloalkanes (lower proportion). Lots produced prior to March 2017 contained CAS# 8030-30-6, a C10-C13 isoparaffins odorless Mineral Spirit with >98% isoparaffins (branched alkanes/aromatics) and minimal n-alkanes.

Diesel Fuel #2 (ASTM Class 5 Accelerant)

More Details
Prepared from a single source (one refinery) product. The weathered materials indicate the percent weight loss from the original material.

Kerosene (ASTM Class 4 Accelerant)

More Details
Prepared from a single source (one refinery) product. The weathered materials indicate the percent weight loss from the original material.

Unleaded Gasoline (ASTM Class 2 Accelerant)

More Details
Prepared from a single source (one refinery) product. The weathered materials indicate the percent weight loss from the original material.

MA VPH Matrix Spike Mix with Surrogate Rev. 1.1 (July 2004) (16 components)

More Details
  • For current Massachusetts VPH method: surrogate included.
  • Matrix spike mix at 50µg/mL, per updated method.

MA VPH Standard with Surrogate Rev. 1.1 (July 2004) (16 components)

More Details
  • Standard for current Massachusetts VPH method: surrogate included.
  • More analyses per ampulstandard with surrogate is 10,000µg/mL.

CA WIP VOA Standard (11 components)

More Details
For monitoring samples suspected of gasoline contamination, Los Angeles County requires laboratories to calibrate and report these compounds.

Certified Aromatics in Gasoline (16 components)

More Details
  • Confirm unleaded gasoline TPH, BTEX, and aromatics in a single analysis.
  • Certificate of Analysis includes concentration of TPH, and certified concentrations of BTEX and individual aromatics.
  • Complete data pack available.

Stoddard Solvent Standard

More Details
We offer this certified reference material for those who need to calibrate Stoddard solvent separately. This standard is dissolved in methanol for analysis by either direct injection or purge and trap.

Stoddard Solvent Standard

More Details
We offer this certified reference material for those who need to calibrate Stoddard solvent separately. This standard is dissolved in methanol for analysis by either direct injection or purge and trap.

Fuel Oil Degradation Mix (4 components)

More Details
Subsurface degradation of fuel oil spills can be estimated by examining the ratios of C17/pristane and C18/phytane.1 To assist in identifying these four compounds from the complex fuel oil analysis, we offer a product that contains these compounds for retention time determination.

Diesel Fuel #2 Standard

More Details
Prepared from a single-source (one-refinery) product.

Kerosene Standard

More Details
Prepared from a single-source (one-refinery) product.

Unleaded Gasoline Standard

More Details
Prepared from a single-source (one-refinery) product.

Hydraulic Oil Standard

More Details
  • For total petroleum hydrocarbon pattern recognition of hydraulic oil.
  • High concentration50,000 µg/mL in methylene chloride.

Creosote Oil Standard

More Details
Creosote oil is a coal tar derived distillate.

  • For total petroleum hydrocarbon pattern recognition of creosote oil.
  • High concentration50,000 µg/mL in methylene chloride.

Aviation Gas Standard

More Details
100-octane, low-lead fuel used in piston-type aircraft.

Fuel Oil #6 Standard

More Details
A high-viscosity residual type of heavy fuel oil requiring preheating to 104–127 °C. This material is also known as residual fuel oil (RFO) or Bunker C.

Fuel Oil #4 Standard

More Details
Fuel oil #4 is typically used in limited applications in which the fuel cannot be preheated prior to burning. The fuel is a blend of distillate (fuel oil #2) and residual (fuel oil #6).

Used Motor Oil Composite Standard

More Details
  • Prepared from an equal-volume blend from five gasoline-powered vehicles (belonging to Restek employees). After blending, a precisely weighed amount of the composite is added to a volumetric flask to produce the standard.
  • Motor oil standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Motor Oil Composite Standard

More Details
  • Prepared from an equal-volume blend of 5W30, 10W30, 10W40, and 20W50 motor oils. After blending, a precisely weighed amount of the composite is added to a volumetric flask to produce the standard.
  • Motor oil standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Kerosene Composite Standard

More Details
  • Kerosene composite standards are comprised of three separate sources blended in equal portions.
  • Kerosene standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Diesel Fuel #2 Composite Standard

More Details
  • Diesel Fuel composite standards are comprised of three separate sources blended in equal portions.
  • Diesel Fuel standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Unleaded Gasoline Composite Standard

More Details
  • Unleaded gasoline composite standards are comprised of three separate sources each of 87, 89, and 93 octane blended in equal portions.
  • Gasoline standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

    NOTE: BTEX content of catalog numbers 30081, 30205, and 30206 is not measured. Certified BTEX gasoline standards are available as catalog numbers 30237 and 30485.

TNRCC 1005 Retention Time Markers Mix (4 components)

More Details
  • Easily determine the retention time window for each boiling point range.
  • Prepared in n-pentane according to EPA requirements.

PCB Kit #3

More Details
  • Aroclor standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

    1,000 µg/mL each in hexane, 1 mL/ampul
    32007: Aroclor 1221
    32008: Aroclor 1232
    32009: Aroclor 1242
    32010: Aroclor 1248
    32011: Aroclor 1254
    32039: Aroclor 1016/1260

PCB Kit #2

More Details
  • Aroclor standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

    200 µg/mL each in isooctane, 1 mL/ampul
    32064: Aroclor 1016
    32065: Aroclor 1221
    32066: Aroclor 1232
    32067: Aroclor 1242
    32068: Aroclor 1248
    32069: Aroclor 1254
    32070: Aroclor 1260

PCB Kit #1

More Details
  • Aroclor standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

    1,000 µg/mL each in hexane, 1 mL/ampul
    32006: Aroclor 1016
    32007: Aroclor 1221
    32008: Aroclor 1232
    32009: Aroclor 1242
    32010: Aroclor 1248
    32011: Aroclor 1254
    32012: Aroclor 1260

Pesticide Standard Mix B w/Surrogates (13 components)

More Details
Components of these products are at 16x the contract-required quantitation level (CRQL) and can be used to prepare calibration mixes at 4x CRQL and at 1x CRQL by serial dilution.

Pesticide Standard Mix A w/Surrogates (11 components)

More Details
Components of these products are at 16x the contract-required quantitation level (CRQL) and can be used to prepare calibration mixes at 4x CRQL and at 1x CRQL by serial dilution.

Revised GPC Calibration Mix (5 components)

More Details
Qualitative mixture useful for determining GPC dump/collect times. The compounds are dissolved in methylene chloride at the concentrations listed.

CLP GPC Calibration Mix (5 components)

More Details
Qualitative mixture useful for determining GPC dump/collect times. The compounds are dissolved in methylene chloride at the concentrations listed.

Semivolatile Calibration Kit #3 (with benzidine)

More Details
Contains 1 mL each of these mixtures.
31007: SV Calibration Mix #1 (anilines)
31008: SV Calibration Mix #2 (phenols)
31009: SV Calibration Mix #3 (base neutrals)
31010: SV Calibration Mix #4 (base neutrals)
31011: SV Calibration Mix #5 (PAHs)
31013: SV Calibration Mix #7 (dichlorobenzenes)
31030: 605 Benzidines Calibration Mix (benzidine & 3,3'-dichlorobenzidine)

L/C VOA Lab Control Sample #2 (Vinyl chloride)

More Details
We prepare the L/C VOA Lab Control Sample in two parts. Sample #1 contains all compounds except vinyl chloride, because this compound is extremely volatile and must be replaced frequently. Sample #2 contains vinyl chloride.

CLP 04.1 VOA Kit #3

More Details
Contains 1 mL each of these mixtures.
30006: VOA Calibration Mix #1 (ketones)
30042: 502.2 Calibration Mix #1 (gases)
30456: CLP 04.1 VOA CAL2000 MegaMix Standard

8330 Calibration Mix #2 (7 components)

More Details
Obtaining pure, neat compounds for Method 8330 reference standards can be very difficult.
To ensure the highest quality standards, Restek's Quality Control (QC) lab confirms the identity and purity of mixture components and solvents using one or more of the following techniques: GC-FID, HPLC, GC-ECD, GC-MS, LC-MS, refractive index, and melting point.

8330 Calibration Mix #1 (7 components)

More Details
Obtaining pure, neat compounds for Method 8330 reference standards can be very difficult.
To ensure the highest quality standards, Restek's Quality Control (QC) lab confirms the identity and purity of mixture components and solvents using one or more of the following techniques: GC-FID, HPLC, GC-ECD, GC-MS, LC-MS, refractive index, and melting point.

8330 Surrogate (1,2-Dinitrobenzene)

More Details
Obtaining pure, neat compounds for Method 8330 reference standards can be very difficult.
To ensure the highest quality standards, Restek's Quality Control (QC) lab confirms the identity and purity of mixture components and solvents using one or more of the following techniques: GC-FID, HPLC, GC-ECD, GC-MS, LC-MS, refractive index, and melting point.

8330 Surrogate (1,2-Dinitrobenzene)

More Details
Obtaining pure, neat compounds for Method 8330 reference standards can be very difficult.
To ensure the highest quality standards, Restek's Quality Control (QC) lab confirms the identity and purity of mixture components and solvents using one or more of the following techniques: GC-FID, HPLC, GC-ECD, GC-MS, LC-MS, refractive index, and melting point.

8330 Internal Standard (3,4-Dinitrotoluene)

More Details
Obtaining pure, neat compounds for Method 8330 reference standards can be very difficult.
To ensure the highest quality standards, Restek's Quality Control (QC) lab confirms the identity and purity of mixture components and solvents using one or more of the following techniques: GC-FID, HPLC, GC-ECD, GC-MS, LC-MS, refractive index, and melting point.

8330 Internal Standard (3,4-Dinitrotoluene)

More Details
Obtaining pure, neat compounds for Method 8330 reference standards can be very difficult.
To ensure the highest quality standards, Restek's Quality Control (QC) lab confirms the identity and purity of mixture components and solvents using one or more of the following techniques: GC-FID, HPLC, GC-ECD, GC-MS, LC-MS, refractive index, and melting point.

Formaldehyde-DNPH Mix

More Details
  • High concentration.
  • Acetonitrile solventsuitable for HPLC analyses.

Aldehyde-Ketone-DNPH TO-11A Calibration Mix (15 components)

More Details
  • Convenient 15µg/mL concentration, similar to the concentration of interest in most ambient air work.
  • Fast analysis Ultra C18 HPLC column separates 15 aldehydes/ketones in 16 minutes.

Aldehyde-Ketone-DNPH TO-11A Calibration Mix (15 components)

More Details
  • Convenient 15µg/mL concentration, similar to the concentration of interest in most ambient air work.
  • Fast analysis Ultra C18 HPLC column separates 15 aldehydes/ketones in 16 minutes.

8270 Calibration Kit (2,000 µg/mL)

More Details
Contains 1 mL each of these mixtures.
31618: 8270 Calibration Mix #1
31619: 8270 Calibration Mix #2
31620: 8270 Calibration Mix #3
31621: 8270 Calibration Mix #4
31995: 8270 Calibration Mix #5, Revised
31996: 3-Methylcholanthrene Standard

8270/Appendix IX Kit

More Details
Contains 1 mL each of these mixtures.
31850: 8270 MegaMix Standard
31834: 605 Benzidines Calibration Mix
32459: Appendix IX Mix #1, Revised (Methapyrilene is not included in this revised standard.)
32460: Methapyrilene Standard
31806: Appendix IX Mix #2

Acid Matrix Spike Mix (5 components)

More Details
  • Highest concentrations commercially available.
  • Reduces laboratory cost per sample extract.

B/N Matrix Spike Mix (6 components)

More Details
  • Highest concentrations commercially available.
  • Reduces laboratory cost per sample extract.

B/N Matrix Spike Mix (6 components)

More Details
  • Highest concentrations commercially available.
  • Reduces laboratory cost per sample extract.

Acid Surrogate Mix (4/89 SOW) (3 components)

More Details
  • Highest concentrations commercially available.
  • Convenient 1 mL, 5 mL, and 10 mL package sizes.
  • Reduces laboratory cost per sample extract.

Acid Surrogate Mix (4/89 SOW) (3 components)

More Details
  • Highest concentrations commercially available.
  • Convenient 1 mL, 5 mL, and 10 mL package sizes.
  • Reduces laboratory cost per sample extract.

B/N Surrogate Mix (4/89 SOW) (3 components)

More Details
  • High purity for consistent results.
  • Free quality assurance data package available online.
  • Highest concentrations commercially available.
  • Convenient 1 mL, 5 mL, and 10 mL package sizes reduce cost per sample extract.

B/N Surrogate Mix (4/89 SOW) (3 components)

More Details
  • High purity for consistent results.
  • Free quality assurance data package available online.
  • Highest concentrations commercially available.
  • Convenient 1 mL, 5 mL, and 10 mL package sizes reduce cost per sample extract.

SV Internal Standard Mix (6 components)

More Details
  • High purity for consistent results.
  • Free quality assurance data package available online.
  • Highest concentrations commercially available.

SV Internal Standard Mix (6 components)

More Details
  • High purity for consistent results.
  • Free quality assurance data package available online.
  • Highest concentrations commercially available.

8260 Volatile Organics Kit (2,000 µg/mL)

More Details
Contains 1 mL each of these mixtures.
30042: 502.2 Calibration Mix #1
30043: 502.2 Calibration Mix #2
30044: 502.2 Calibration Mix #3
30045: 502.2 Calibration Mix #4
30046: 502.2 Calibration Mix #5
30047: 502.2 Calibration Mix #6
30067: 4-bromofluorobenzene (2,500 µg/mL)
30073: 8260 Surrogate Mix (2,500 µg/mL)
30074: 8260 Internal Standard Mix (2,500 µg/mL)
30075: 8240/8260 System Performance Check Mix
30005: VOA Matrix Spike Mix (2,500 µg/mL)

8260A Volatile Organics Kit (2,000 µg/mL)

More Details
Contains 1 mL each of these mixtures.
30042: 502.2 Calibration Mix #1
30043: 502.2 Calibration Mix #2
30044: 502.2 Calibration Mix #3
30045: 502.2 Calibration Mix #4
30046: 502.2 Calibration Mix #5
30047: 502.2 Calibration Mix #6
30067: 4-bromofluorobenzene (2,500 µg/mL)
30240: 8260A Surrogate Mix (2,500 µg/mL)
30241: 8260A Internal Standard Mix (2,500 µg/mL)
30075: 8240/8260 System Performance Check Mix
30005: VOA Matrix Spike Mix (2,500 µg/mL)

8260 Acetate Mix (Revised) (7 components)

More Details
  • Includes methyl acetate and n-amyl acetate.
  • Contains 7 acetates.

Chloroprene

More Details
A pure, quantitative chloroprene solution, specially stabilized in purge-and-trap grade methanol to allow dilutions for working standards in unmodified purge-and-trap methanol. The entire preparation procedure is performed under carefully monitored conditions to prevent any contamination or polymerization of the highly reactive, neat chloroprene.

8140/8141 Internal Standards & Surrogates

More Details
FPD Detector:
Internal Standard: none recommended
Surrogate: tributylphosphate (cat.# 32280) and triphenylphosphate (cat.# 32281)

8140/8141 Internal Standards & Surrogates

More Details
NPD Detector:
Internal Standard: 1-bromo-2-nitrobenzene (cat.# 32279)
Surrogate: 4-chloro-3-nitrobenzotrifluoride (cat.# 32282)

Single-Component Explosives Solutions

More Details
  • Supports U.S. Department of Defense base closures and remediation.
  • Mixtures and singles supporting LC U.S. EPA Method 8330.
  • Mixtures and singles supporting GC-ECD U.S. EPA Method 8095.
  • Internal standards and surrogates to support both methods.

Single-Component Explosives Solutions

More Details
  • Supports U.S. Department of Defense base closures and remediation.
  • Mixtures and singles supporting LC U.S. EPA Method 8330.
  • Mixtures and singles supporting GC-ECD U.S. EPA Method 8095.
  • Internal standards and surrogates to support both methods.

TCLP Chlordane Mix

More Details
  • Chlordane standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

TCLP Toxaphene Mix

More Details
  • Toxaphene standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

418.1 Calibration Mix (3 components)

More Details
Method 418.1 is an infrared spectrophotometric method for determining Total Recoverable Petroleum Hydrocarbons (TRPH). Dilute this mixture 1:200 to make the stock mixture specified in section 6.5.2 of Method 418.1.

Chlordane, Toxaphene Solutions

More Details
  • Chlordane and toxaphene standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Chlordane, Toxaphene Solutions

More Details
  • Chlordane and toxaphene standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Aroclor Solutions

More Details
  • Aroclor standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Aroclor Solutions

More Details
  • Aroclor standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Aroclor Solutions

More Details
  • Aroclor standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

Semivolatiles MegaMix Standard, EPA Method 625 (54 components)

More Details
  • MegaMix mixture includes all target compounds not in our current products.
  • Incorporates all phenols, for fast preparation and calibration.
  • Incorporates “additional” extractable Method 625 compounds.

624 Complete Kit

More Details
Contains 1 mL each of these mixtures.
30020: 624 Calibration Mix #1
30021: 624 Calibration Mix #2
30022: 624 Calibration Mix #3
30023: 624 Internal Standard Mix
30243: 624 Surrogate Standard Mix

624 Kit

More Details
Contains 1 mL each of these mixtures.
30020: 624 Calibration Mix #1
30021: 624 Calibration Mix #2
30022: 624 Calibration Mix #3
30023: 624 Internal Standard Mix

608 Complete Kit

More Details
  • Aroclor, toxaphene, and chlordane standards may exhibit lot-to-lot variation.
  • See the Documentation tab for chromatograms on certificates of recently produced lots and inquire about availability.

    Contains 1 mL each of these mixtures.
    32022: 608 Calibration Mix
    32006: Aroclor 1016
    32007: Aroclor 1221
    32008: Aroclor 1232
    32009: Aroclor 1242
    32010: Aroclor 1248
    32011: Aroclor 1254
    32012: Aroclor 1260
    32005: toxaphene
    32021: chlordane

Acrolein/Acrylonitrile (2 components)

More Details
This product has a limited shelf life. We recommend that you order only the ampul quantity that meets your immediate needs.

NOTE: Store standards under frozen conditions (0 °C or colder). We recommend you store ampuls lying flat (horizontally) to prevent breakage. For best results, thaw the contents of the ampul fully and shake the ampul well before opening and using the solution.

Drinking Water Odor Standard (2 components)

More Details
  • Reference mix of the two most common odor-causing compounds.
  • Convenient concentration for purge-and-trap analysis: 100 µg/mL in methanol.

Drinking Water Odor Standard (2 components)

More Details
  • Reference mix of the two most common odor-causing compounds.
  • Convenient concentration for purge-and-trap analysis: 100 µg/mL in methanol.

Internal Standards and Surrogates for Method 552

More Details
Internal Standard: cat.# 31648
Surrogate for Method 552, 552.1: cat.# 31650
Surrogates for Method 552.2: cat.#'s 31653, 31655, 31656
Surrogate for Method 552.3: cat.# 31881

Haloacetic Acid Mix #2 (9 components)

More Details
  • Meet Stage 1 requirements for US EPA Methods 552, 552.1 and 552.2.
  • Meet requirements for Stage 2 DBPR.
  • Prepared from purified neat reference materials for the highest quality.
  • Lot-to-lot consistency ensures analytical reproducibility.

Haloacetic Acid Methyl Ester Mix #1 (6 components)

More Details
  • Meet Stage 1 requirements for US EPA Methods 552, 552.1 and 552.2.
  • Meet requirements for Stage 2 DBPR.
  • Prepared from purified neat reference materials for the highest quality.
  • Lot-to-lot consistency ensures analytical reproducibility.

Haloacetic Acid Mix #1 (6 components)

More Details
  • Meet Stage 1 requirements for US EPA Methods 552, 552.1 and 552.2.
  • Meet requirements for Stage 2 DBPR.
  • Prepared from purified neat reference materials for the highest quality.
  • Lot-to-lot consistency ensures analytical reproducibility.

531.2 Carbamate Pesticide Calibration Mixture (11 components)

More Details
  • Complete set of materials for N-methylcarbamoyloximes and N-methylcarbamates.
  • New mix satisfies latest update of EPA Method 531.2.
  • Formulated in acetonitrile for stability and convenience for LC analysis.

531.2 Carbamate Pesticide Calibration Mixture (11 components)

More Details
  • Complete set of materials for N-methylcarbamoyloximes and N-methylcarbamates.
  • New mix satisfies latest update of EPA Method 531.2.
  • Formulated in acetonitrile for stability and convenience for LC analysis.

Internal Standard Mix, EPA 528 (2 components)

More Details
  • Reference materials for U.S. EPA Method 528.
  • Fortification solution formulated based on MS sensitivity to each analyte.

Phenol Calibration Mix, EPA 528 (12 components)

More Details
  • Reference materials for U.S. EPA Method 528.
  • Fortification solution formulated based on MS sensitivity to each analyte.

524.2 Surrogate Standard (2 components)

More Details
  • Separate mixes for surrogates and internal standard.
  • Fortification solution combines surrogates and internal standard.
  • Calibration mixes and all other quality control mixes also available.

524 Rev. 4.0 VOA Kit #2 (2,000 µg/mL)

More Details
Contains 1mL each of these mixtures.
30042: 502.2 Calibration Mix #1
30431: 502.2 MegaMix
30300: 524 Calibration Mix #7A
30304: 524 Calibration Mix #7B
30203: 524 Calibration Mix #8
30201: 524 Surrogate/Internal Standard Mix

524 Rev. 4.0 Volatile Organics Kit (2,000 µg/mL)

More Details
Contains 1 mL each of these mixtures.
30201: 524 Internal Standard/Surrogate Mix
30042: 502.2 Calibration Mix #1
30043: 502.2 Calibration Mix #2
30044: 502.2 Calibration Mix #3
30045: 502.2 Calibration Mix #4
30046: 502.2 Calibration Mix #5
30047: 502.2 Calibration Mix #6
30300: 524 Calibration Mix #7A
30304: 524 Calibration Mix #7B
30203: 524 Calibration Mix #8

524 Calibration Mix #7 Kit

More Details
Contains 1 mL each of these mixtures.
30300: 524 Calibration Mix #7A
30304: 524 Calibration Mix #7B

Herbicide Mix #2

Derivatized Form

Herbicide Mix #2

Derivatized Form

Herbicide Mix #2

Free Acid Form

Herbicide Mix #2

Free Acid Form

Organochlorine Pesticide System Evaluation Mix (2 components)

More Details
  • Designed for daily assessment of system performance.
  • Reveals active sites in the injection port and/or GC column.
  • Prepared in MTBElow expansion volume helps minimize backflash.

Organochlorine Pesticide System Evaluation Mix (2 components)

More Details
  • Designed for daily assessment of system performance.
  • Reveals active sites in the injection port and/or GC column.
  • Prepared in MTBElow expansion volume helps minimize backflash.

508.1 Pesticide Kit

More Details
Contains 1 mL each of these mixtures.
32045: 508 Performance Check Mix
32091: 508.1 Internal Standard Mix
32092: 508.1 Surrogate Mix
32093: 508.1 GC Degradation Check Mix
32094: 508.1 Calibration Mix #1
32095: 508.1 Calibration Mix #2
32096: 508.1 Calibration Mix #3

502.2 VOA Calibration Kit #1 (2,000 µg/mL)

More Details
Contains 1 mL each of these mixtures.
30042: 502.2 Calibration Mix #1
30043: 502.2 Calibration Mix #2
30044: 502.2 Calibration Mix #3
30045: 502.2 Calibration Mix #4
30046: 502.2 Calibration Mix #5
30047: 502.2 Calibration Mix #6

Antifoam Agent for Purge-and-Trap Samples

More Details
  • Efficiently controls foam; effective over a wide pH range.
  • No hazardous materials, no components that are target analytes.
  • Effective at less than 0.1% of sample volume.

502.2 VOA Calibration Kit #3 (200 µg/mL)

More Details
Contains 1 mL each of these mixtures.
30439: 502.2 Calibration Mix #1
30432: 502.2 MegaMix Standard

502.2 VOA Calibration Kit #2 (2,000 µg/mL)

More Details
Contains 1 mL each of these mixtures.
30042: 502.2 Calibration Mix #1
30431: 502.2 MegaMix Standard

DW-VOC Kit #2 (2,000 µg/mL)

More Details
Contains 1 mL each of these mixtures.
30211: 501 Trihalomethane Mix
30219: DW-VOC Mix #1
30220: DW-VOC Mix #2
30235: DW-VOC Mix #3

Massachusetts APH Mix (26 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

Massachusetts APH Mix (26 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

FAME #12 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #12: oils of mid-range to long chain lengths (C13 - C21)

FAME #9 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #9: oils of mid-range to long chain lengths (C16 - C20)

FAME #8 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #8: oils of short to mid-range chain lengths (C11 - C15)

FAME #7 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #7: oils of short chain lengths (C6 - C10)

FAME #6 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #6: oils of long chain lengths (C20 - C21)

FAME #5 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #5: oils of mid-range to long chain lengths (C16 - C24)

FAME #4 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #4: oils of mid-range to long chain lengths (C16 - C24)

FAME #3 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #3: oils of short to mid-range chain lengths (C8 - C16)

FAME #2 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #2: oils of short to mid-range chain lengths (C6 - C14)

FAME #1 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #1: oils of mid-range chain lengths (C16 - C18)

FAME #15 Mix (8 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #15: peanut oil

FAME #14 Mix (11 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #14: cocoa butter

FAME #13 Mix (14 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #13: mustard seed oil

FAME #21 Mix (7 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #21: lard, beef or mutton tallow, and palm oil

FAME #20 Mix (8 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #20: coconut, palm kernel, babassu, and ouri-curi oil

FAME #19 Mix (4 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #19: olive, teaseed, and neatsfoot oil

FAME #18 Mix (10 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #18: peanut, rapeseed, and mustard seed oil

FAME #17 Mix (5 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #17: linseed, perilla, hempseed, and rubberseed oil

FAME #16 Mix (6 components)

More Details
This mixture can be used for quantification (AOCS Method CE 1a13) and approximate the compositions of the following types of oils:

FAME #16: corn, poppy seed, cotton seed, soybean, walnut, safflower, sunflower, rice, bran, and sesame oil

Airgas Transportable Pure Gases and Mixtures in 14 L, 48 L, and 110 L Sizes

More Details
We offer a wide range of Airgas (formerly Scott/Air Liquide gas) transportable gases, from pure gases for purging or calibrating to multicomponent mixes, which are ideal for peak identification work.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

Airgas Transportable Pure Gases and Mixtures in 14 L, 48 L, and 110 L Sizes

More Details
We offer a wide range of Airgas (formerly Scott/Air Liquide gas) transportable gases, from pure gases for purging or calibrating to multicomponent mixes, which are ideal for peak identification work.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

Ozone Precursor/PAMS Mix (57 components at EPA concentrations: ppbC)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

Refinery Gas Standard #5 (26 components)

More Details
Available in three mixes with varying C5 unsaturates or extended C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Refinery Gas Standard #5 (26 components)

More Details
Available in three mixes with varying C5 unsaturates or extended C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Refinery Gas Standard #2 (27 components)

More Details
Available in three mixes with varying C5 unsaturates or extended C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Refinery Gas Standard #2 (27 components)

More Details
Available in three mixes with varying C5 unsaturates or extended C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Refinery Gas Standard #1 (21 components)

More Details
Available in three mixes with varying C5 unsaturates or extended C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Refinery Gas Standard #1 (21 components)

More Details
Available in three mixes with varying C5 unsaturates or extended C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Natural Gas Standard #3 (10 components)

More Details
Available in three mixes, from lean to rich. Each has an extended list of C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Natural Gas Standard #3 (10 components)

More Details
Available in three mixes, from lean to rich. Each has an extended list of C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Natural Gas Standard #2 (10 components)

More Details
Available in three mixes, from lean to rich. Each has an extended list of C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Natural Gas Standard #2 (10 components)

More Details
Available in three mixes, from lean to rich. Each has an extended list of C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Natural Gas Standard #1 (10 components)

More Details
Available in three mixes, from lean to rich. Each has an extended list of C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

Natural Gas Standard #1 (10 components)

More Details
Available in three mixes, from lean to rich. Each has an extended list of C6+ components.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, see Restek Recommends below.

TO-15 Subset 25 Component Mix (25 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-15 65 Component Mix (65 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-14A 43 Component Mix (43 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-14A 41 Component Mix (41 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

Ozone Precursor Mixture/PAMS (57 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

Japan Calibration Mix (9 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

BTEX Gas Mix (6 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

BTEX Gas Mix (6 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

BTEX Gas Mix (6 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-14A Internal Standard/Tuning Mix (4 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-14A GC-MS Tuning Mix

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-14A Internal Standard Mix (3 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-14A CFC/HCFC Mix (4 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-14A Chlorinated Hydrocarbon Mix (19 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-14A Aromatics Mix (14 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.

TO-14A Calibration Mix (39 components)

More Details
Our high-quality air monitoring gas calibration standards are provided by Spectra/Linde and Airgas (formerly Scott/Air Liquide gas)meeting lab requirements for two separate sources of calibration standards.

Note: Actual cylinder pressure may vary due to loss from quality testing procedure.

To view compatible regulators, select your standard below and see Restek Recommends.