share:

Application-Specific QC Test on Rxi®-PAH (40 m x 0.18 mm x 0.07 µm)

Peaks
1.Triphenylene
2.Chrysene
3.Benzo[b]fluoranthene
4.Benzo[k]fluoranthene
5.Benzo[j]fluoranthene
image
GC_FF1238
ColumnRxi®-PAH, 40 m, 0.18 mm ID, 0.07 µm (cat.# 49316)
SampleQC test mix
Diluent:Toluene
Conc.:25-250 µg/mL
Injection
Inj. Vol.:1 µL split
Liner:4 mm ID Precision® low pressure drop liner w/deact. wool (cat.# 21032)
Inj. Temp.:275 °C
Split Vent Flow Rate:195 mL/min
Oven
Oven Temp.:120 °C (hold 15 min) to 240 °C at 12 °C/min (hold 10 min) to 285 °C at 6 °C/min to 350 °C at 25 °C/min (hold 9.9 min)
Carrier GasH2, constant flow
Linear Velocity:38 cm/sec
DetectorFID @ 350 °C
InstrumentAgilent/HP6890 GC
Download PDF

Printing tips! To print chromatograms full page, change the print settings in the print dialogue window of your PDF reader software: 1) "fit" or "fit to page", 2) "landscape" for wide chromatograms or "portrait" for tall chromatograms.


Restek Domestic Customer Service

Subject

Message

Your Full Name

Your Email

Company Name

Address

Spam Block (Please leave this blank)

all fields required

Thank you

Your message has been sent. We will be in touch shortly.

Message not sent

Sorry, your message could not be sent at this time. Please try again later, or contact Restek or your local Restek representative via phone.

www.restek.com/Contact-Us