This chromatogram may contain analytes that are synonyms of your search terms.
Impurities in Commercial Cyclohexane on Rtx-DHA-100
|Column||Rtx-DHA-100, 100 m, 0.25 mm ID, 0.50 µm (cat.# 10148)|
|Sample||Impurities commonly found in commercial cyclohexane|
|Inj. Vol.:||0.6 µL split (split ratio 100:1)|
|Liner:||Topaz 4.0 mm ID Precision inlet liner w/wool (cat.# 23305)|
|Inj. Temp.:||250 °C|
|Oven Temp.:||35 °C (hold 15 min) to 65 °C at 5 °C/min (hold 5 min) to 200 °C at 20 °C/min (hold 2 min)|
|Carrier Gas||He, constant flow|
|Flow Rate:||2.4 mL/min|
|Instrument||Agilent 7890B GC|
|Notes||Sample is a synthetic blend prepared with impurities known to be present in cyclohexane at concentrations expected to be found in commercial samples.|
Note that the distorted peak shape of 3,3-dimethylpentane is an example of "solvent effect." Solvent effect occurs when the analytical starting temperature is much lower than the boiling point of the solvent. When that occurs, the solvent peak affects the chromatography of compounds eluting near it. Peak shape for the compounds eluting prior to the solvent peak are usually distorted, while compounds eluting after the solvent peak will have somewhat increased retention.
RELATED CHROMATOGRAM LIBRARY SEARCHES
Printing tips! To print chromatograms full page, change the print settings in the print dialogue window of your PDF reader software: 1) "fit" or "fit to page", 2) "landscape" for wide chromatograms or "portrait" for tall chromatograms.